Makita HM1214C 240V AVT SDS Max In-Line Demolition Hammer


The Makita HM1214C is a 10kg-class demolition hammer adapted for SDS-MAX bits. The main features are as follows: AVT (Active dynamic vibration absorber) for reduced vibration during chipping.

In stock


Makita HM1214C 240V AVT SDS Max In-Line Demolition Hammer

Makita HM1214C-240V Demolition Hammer Drill 240v big and powerful 10kgs class. The Demolition Hammer has a soft start to suppress start-up for faster. The HM1214C has an optimized one-touch sliding chuck for quick and easy installation and removal of SDS-Max parts

demolition hammer is a powerful tool meant to break down large walls made of concrete. There are a variety of sizes and styles that you can purchase. The higher the number of joules, the more force the demolition hammer generates. It makes a pretty big difference, you see, whether you want to cut out a narrow slot, or you need to break open a concrete floor. The technology behind every demolition hammer is the same. The head doesn’t rotate but moves back and forth.

AVT (Active dynamic vibration absorber) for vibration reduction during shipment. Suppression of motor speed during no-load at idling for reduced vibration. The inline architecture of the software is suitable for vertical applications downwards. High efficiency at work.

  • Variable speed control
  • Soft start suppresses start-up reaction
  • L.E.D. power light indicates switch failure or cord damage
  • One-touch chuck allows for quick bit changes
  • 12-bit angle settings allow the bit.
  • Extended life brushes are longer for more work between service intervals and less downtime.
  • “No hammering when idling” function helps increase tool life.
  • Rubberized ergonomic soft grip provides more comfort
  • Side handle swivels 360° for greater control


  • Impact energy: 19.9 J
  • Blows per minute: 950 – 1900 bpm
  • Input wattage: 1500 W
  • Bit Angle Setting: 12 Stage
  • Vibration: Chiselling: 8 m/sec²
  • Vibration K factor: 1.5 m/sec²
  • Noise sound pressure: 78 dB(A)
  • Noise sound power: 98 dB(A)
  • Noise K factor: 2.57 dB(A)
  • 12 stage bit angle setting
  • Tri-axial
  • Electronic speed control for maximum productivity
  • Long-life carbon brushes
  • Soft start
  • Anti-vibration system – Ultra-low vibration
  • Double insulated
  • Hammer only
  • Variable speed trigger
  • Constant speed under load
  • The LED lamp indicates when carbon brushes need replacing
  • One-touch sliding chuck for easy bit installation and removal

Additional Information

Promotional Image No
Voltage 240V
Delivery Order by 5PM to get delivered next working day
Weight 0.0000
Size No
Pack Size No
Motor Type Brushed