Description
Makita HR4013C 110V SDS Max Rotary Hammer
The new Makita HR4013C SDS max rotary hammer will punch a 40 mm hole in the concrete. With an even greater vibration rate reduction of 30 percent. For a device of this size and weight, SDS Max rotary hammer drill with exceptionally low vibration rates. Supplied with the AVT system.
For a fast bit turn, there is a one-touch sliding chuck and a torque limiter prevents the user from “snagging” into rotating mode plus a simple phase change lever at the topo. This has two working modes, Rotary Hammer and Just the Hammer. This represents an improvement of 25 percent compared to the famous HR4011C model it replaces.
SDS Plus is an improvement on the original SDS system, but remains compatible with SDS bits, and is now the most commonly seen on the market. They can be used on DIY jobs and for jobs on-site when a standard rotary drill or hammer drill just doesn’t have the capability to get the job done.
-
- One-touch sliding chuck for easy bit installation and removal
- The damper spring behind the drill bit absorbs reaction force caused by the drill bit at the moment of impact
- LED service light indicates when to replace the carbon brush.
- Easy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage.